Solder Tag Board, 40 Contact, 6mm Pitch, 4 Row, 12 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Solder Tag Board for Raspberry Pi

This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.

Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.

The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.

A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.

Advantages

Cheap to replace Easy to make and break solder connections
Helps to unlock the full potential of the Raspberry Pi GPIO interface

Features and Benefits

• 40 Solder tag terminals corresponding to the 40 pins on the Raspberry Pi
• Easy to solder and keeps work away from the Pi
• High quality SRBP base
• Hot tinned tags
• Mounting holes and central slot
• Can be mounted beneath the Pi using mounting kit (available separately, see above)

Specificaties
Kenmerk Waarde
Number of Contacts 40
Pitch 6mm
Contact Material Steel
Contact Plating Tin
Number of Rows 4
Voltage Rating 12 V
Dimensions 86 x 56 x 7.5mm
Depth 7.5mm
Width 56mm
Length 86mm
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
278 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,69
(excl. BTW)
3,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
2,69 €
10 - 99
2,48 €
100 +
2,29 €
Related Products
Standard type comprises 28 tags, 18 insulated and ...
Description:
Standard type comprises 28 tags, 18 insulated and 10 earthed/fixingMiniature type has 28 insulated tagsFixing centre 28.6mm.
A range of single row tri-barrier barrier strips ...
Description:
A range of single row tri-barrier barrier strips with a 11.10mm centreline. These tri-barrier barrier strips have an open bottom block design with standoffs and a wire clamp combo screw terminal head.
Double-row, dual barrier strips for wire-to-wire applications. These ...
Description:
Double-row, dual barrier strips for wire-to-wire applications. These parts also allow end users to complete the wiring to a separate screw without disturbing the factory wiring. Increased current-carrying capability.Materials used:Insulator Body: UL 94 V-0 thermoplastic, blackTerminal: Brass, tin platedScrew: ...
A range of single row tri-barrier barrier strips ...
Description:
A range of single row tri-barrier barrier strips with a 6.35mm centreline. These tri-barrier barrier strips have an open bottom block design with standoffs and a wire clamp combo screw terminal head.