KTR Barrel Gear Coupling Sleeve BOWEXM38-SLEEVE-PB

  • RS-stocknr. 869-1733
  • Fabrikantnummer BOWEXM38-SLEEVE-PB
  • Fabrikant KTR
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

BoWex M Tooth Gear Coupling Sleeve

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

Features and Benefits

• For all applications in the range of machinery and hydraulics
• Maintenance free due to material combination nylon/steel
• Taper and inch bores for hydraulic pumps
• 100° maximum operating temperature
• Absorbs axial, angular and radial misalignment
• Torsionally rigid
• Short shaft distance

Product Application Information

Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).

Note

Each coupling comprises of three parts (sold separately) two coupling hubs and a gear coupling sleeve.

Specificaties
Kenmerk Waarde
Outside Diameter 83mm
Length 48mm
For Use With Curved Tooth Gear Coupling
Series Bowex®
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,75
(excl. BTW)
25,11
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
20,75 €
5 - 9
19,91 €
10 +
19,47 €
Related Products
Curved tooth gear couplings to compensate for axial, ...
Description:
Curved tooth gear couplings to compensate for axial, radial and angular shaft displacement. Each coupling comprises of three parts (sold separately) two coupling hubs and a gear coupling sleeve. Available in various sizes from 14 mm to 32 mm. Maintenance ...
Designed to perform where higher speeds, greater misalignment, ...
Description:
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, ...
Flexible shaft connection with axial, radial or angled ...
Description:
Flexible shaft connection with axial, radial or angled offset. Radial cable terminationAlarm, A, B, N outputEncoders: OptoAsic technology for greater reliabilityPulse shape: Square wave, 1:1 duty cycle.
Flexible bellows type coupling from Sick. Designed for ...
Description:
Flexible bellows type coupling from Sick. Designed for use within the Sick Stegmann Programmable Incremetal Decoder. Freely programmable PPR from 1 to 8192Solid shaft or hollow shaft designElectronic adjustment of zero/marker pulseSealed to IP65 (with mating connector fitted)Interchangeable with most ...