KTR Barrel Gear Coupling Hub BOWEXM48-COMPLETE

  • RS-stocknr. 869-1758
  • Fabrikantnummer BOWEXM48-COMPLETE
  • Fabrikant KTR
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

BoWex M Tooth Gear Couplings

BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.

Features and Benefits

• Double cardanic curved-tooth gear coupling®
• For all applications in the range of machinery and hydraulics
• Maintenance free due to material combination nylon/steel
• Taper and inch bores for hydraulic pumps
• 100° maximum operating temperature
• Absorbs axial, angular and radial misalignment
• Torsionally rigid
• Short shaft distance

Product Application Information

Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).

Note

Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters.

Warning

  • BoWex® couplings with attachments that can generate heat, static charge and sparks are not permitted for use in hazardous locations.
Specificaties
Kenmerk Waarde
Outside Diameter 68mm
Torque Rating 420Nm
Misalignment - Angular ±0.6 ° @ 3000 rpm, ±0.9 ° @ 1500 rpm
Misalignment - Parallel ±0.25 mm @ 3000 rpm, ±0.4 mm @ 1500 rpm
Maximum Speed 5600rpm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
138,53
(excl. BTW)
167,62
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
138,53 €
5 - 9
134,25 €
10 +
129,88 €
Related Products
Ruland MJS15-6-A is a zero-backlash jaw coupling hub ...
Description:
Ruland MJS15-6-A is a zero-backlash jaw coupling hub with a 6mm bore, 15.0mm OD, and 7.6mm length. It is a component in a three-piece design consisiting of two aluminium hubs and an elastomeric insert called the spider creating a lightweight ...
The KTR ROTEX GS three part axial plug ...
Description:
The KTR ROTEX GS three part axial plug in vibration reducing jaw type coupling . Thus different hub designs and the different shore harnesses' offer the optimal coupling for each application in automation engineering. The coupling is used in machine ...
The industry standard general duty jaw coupling. Generally ...
Description:
The industry standard general duty jaw coupling. Generally used for connecting a wide range of equipment including pumps, compressors, gear reducers, line shafts, conveyors and most types of rotating machinery. Quick, simple to installHubs in sintered iron as standardIndustry proven ...
The industry standard general duty jaw coupling. Generally ...
Description:
The industry standard general duty jaw coupling. Generally used for connecting a wide range of equipment including pumps, compressors, gear reducers, line shafts, conveyors and most types of rotating machinery. Quick, simple to installHubs in sintered iron as standardIndustry proven ...