TE Connectivity AMP Series PCB Guide Socket for use with 20 Position High Voltage Connectors

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity M Series Guide Pins and Sockets

M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.

TE Connectivity M Series Connector

Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.

Specificaties
Kenmerk Waarde
Accessory Type Guide Socket
For Use With 20 Position High Voltage Connectors
Series AMP
Length 20.19mm
Height 5.58mm
58 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
257 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,73
(excl. BTW)
5,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
4,73 €
25 - 74
4,16 €
75 - 199
3,97 €
200 - 399
3,31 €
400 +
3,15 €
Verpakkingsopties
Related Products
Harting Har-Bus 64 hard metric connectors, suitable for ...
Description:
Harting Har-Bus 64 hard metric connectors, suitable for many PCI applications.The hard metric connector has been designed to meet high speed connector applications for control and industrial computing systems. All Har-bus HM connectors are designed for press in technology. 2mm ...
The SL 70430 series receptacles are designed to ...
Description:
The SL 70430 series receptacles are designed to be used in signal applications. SL is designed for high density applications and offers design flexibility and automated harness-making capabilities when combined with the SL series tooling. They consist of single row ...
The FI family are designed for board to ...
Description:
The FI family are designed for board to cable applications with the electrical performance to support transmissions of Low Voltage Differential Signalling (LVDS) As products increasingly incorporate digital technology the FI family meets the internal signal needs for products as ...
The FI family are designed for board to ...
Description:
The FI family are designed for board to cable applications with the electrical performance to support transmissions of Low Voltage Differential Signalling (LVDS) As products increasingly incorporate digital technology the FI family meets the internal signal needs for products as ...