NCP2809BDMR2G ON Semiconductor, 2-Channel Audio Amplifier IC, 10-Pin Micro Stereo

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The NCP2809 is a cost-effective stereo audio power amplifier capable of delivering 135mW of continuous average power per channel into 16Ω loads. The NCP2809 audio power amplifier is specifically designed to provide high quality output power from low supply voltage, requiring very few external components. Since NCP2809 does not require bootstrap capacitors or snubber networks, it is optimally suited for low-power portable systems. NCP2809A has an internal gain of 0 dB while specific external gain can be set with NCP2809B.

135mW to a 16 load from a 5.0V power supply
Excellent PSRR (85dB Typical)
Pop & Click noise protection circuit
Ultra Low Current Shutdown Mode
2.2V - 5.5V Operation
Superior THD+N: Less than 0.01%
External Turn-on and Turn-off configuration capability
Ultra Thin MicroDFN-10 (3x3x0.55mm)

Specificaties
Kenmerk Waarde
Amplifier Type Power Amplifier
Output Type 2 Channel Stereo
Maximum Power 135mW
Mounting Type Surface Mount
Amplifier Class Class A-B
Typical Single Supply Voltage 2.5 → 5.5 V
Power Supply Type Single
Number of Channels per Chip 2
Package Type Micro
Pin Count 10
Input Signal Type Single
Output Signal Type Single Ended
Minimum Operating Temperature -40 °C
Width 3.1mm
Height 0.95mm
Maximum Operating Temperature 85 °C
Length 3.1mm
Dimensions 3.1 x 3.1 x 0.95mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28/05/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 4000)
0,24
(excl. BTW)
0,29
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
4000 - 4000
0,24 €
960,00 €
8000 +
0,23 €
920,00 €
*prijsindicatie