Arduino, Due Development Board

  • RS-stocknr. 769-7412
  • Fabrikantnummer A000062
  • Fabrikant Arduino
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Arduino Due Development Boards

The Arduino Due is a development board based on the Atmel SAM3X8E microcontroller. The SAM3X8E is a 32-bit, ARM Cortex M3.

How to get started:

The Arduino Due already has everything on-board to support the MCU. Simply connect it to a PC via microUSB cable or power it via an AC-to-DC adapter or battery. (Please note these are not included)

What else is on-board?

Atmel SAM3X8E Microcontroller
54 x digital I/O pins (12 can be used as PWM outputs)
12 x Analogue inputs
4x UARTS
84 MHz quartz crystal
1 x USB OTG
2 x DAC
2 x TWI
1 x power jack
1 x SPI header
1 x JTAG header
1 x reset button
1 x erase button

Operating Voltage: 3.3V
FLASH Memory: 512 KB
SRAM: 96 KB
Clock Speed: 84 MHz
Dimensions: 101.52 x 53.3 mm

Does it work with the Arduino Shields?

Yes, the Due board works with all available Arduino Shields that run at 3.3V and are compliant with the 1.0 Arduino pinout:
- TWI: SDA and SCL pins that are near to the AREF pin.
- IOREF: allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.
- An unconnected pin, reserved for future use.

Arduino ARM Development Boards

We have a range of Arduino boards at RS that feature a 32-bit ARM microcontroller at the core. The Due with a SAM3X8E ARM Cortex-M3 and the M0/M0 Pro with a SAMD21G18 ARM Cortex-M0.

Warning

  • the Arduino Due board runs at 3.3V (which is different to most other Arduino boards). Applying voltages higher than 3.3V to any I/O pin may cause damage.
Specificaties
Kenmerk Waarde
Product Name Due Development Board
Kit Classification Development Board
Processor Part Number AT91SAM3X8E
Revision 1.0
120 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
685 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
28,85
(excl. BTW)
34,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
28,85 €
10 - 49
28,27 €
50 +
27,71 €
Related Products
Description:
The NFC click is an add-on board that carries the NXP PN7120, a Full NFC Forum-compliant controller with integrated firmware and NCI interface. Near Field Communication (NFC) devices are already used in contactless payment systems, electronic ticketing, smartcards and advertising. ...
The X-NUCLEO-NFC02A1 board contains the M24LR04E-R, a dynamic ...
Description:
The X-NUCLEO-NFC02A1 board contains the M24LR04E-R, a dynamic NFC/RFID Tag IC with a dual-interface EEPROM. It features an I²C interface. Operated either from an external power supply or directly powered by the received carrier electromagnetic fieldM24LR04E-R is 4KB EEPROM organized ...
This small, robust and powerful board has WiFi ...
Description:
This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects.Arduino Nano33 IoT is fully compatible with the Arduino IoT Cloud ...
The Cypress Semiconductor Wi-Fi prototyping kit is a ...
Description:
The Cypress Semiconductor Wi-Fi prototyping kit is a cost-efficient hardware platform that enables the design and debugs of PSoC 6 MCUs. PSoC 6 microcontroller is built for the IoT, delivering the industry's lowest power, most flexible and built-in security. It ...