MikroElektronika MIKROE-2462, NT3H1101 Near Field Communication (NFC) mikroBus Click Board NFC Tag 2 Click for Arduino,

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

NFC Tag 2 click mikroBUS™

The NFC Tag 2 click is an add-on board that carries the NXP NT3H1101, NTAG I²C, Energy harvesting NFC Forum Type 2 Tag with field detection pin and I²C interface. The tap-and-go nature of Near Field Communication (NFC) contactless transmission of data makes many aspects of life more convenient.

NFC Forum Type 2 Tag compliantField Detection output (FD) LED is turned ON when an NFC field is detectedData transfer of 106 kbpsI²C bus interface3.3 V power supplyDimensions 57.15 x 25.4 mm

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Wireless Communication Boards

MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!
Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your designs. Some boards also act as extensions for development platforms such as the Beaglebone, Arduino Uno and Raspberry Pi.

Specificaties
Kenmerk Waarde
Product Name NFC Tag 2 Click
Kit Classification MikroBus Click Board
19 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
10,89
(excl. BTW)
13,18
(incl. BTW)
Aantal stuks
Per stuk
1 +
10,89 €
Related Products
The first Romeo Arduino Control Board with Motor ...
Description:
The first Romeo Arduino Control Board with Motor Drivers is based on the Arduino Uno with a socket to add bluetooth APC220 Radio Communication Module. Also the controller board has integrated input/output sensor pinout for connecting gravity compatible sensors and ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...
Radio Frequency Development Kit. Compatible with Arduino, PMOD ...
Description:
Radio Frequency Development Kit. Compatible with Arduino, PMOD and Grove form factorsUltra-low Power ARM Cortex M3Open Source IDE ToolsNo External Debugger/Emulator Tools needed.
The potentiometer twig produces analog output between 0 ...
Description:
The potentiometer twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is ...