DFRobot DFR0004 Romeo - an Arduino Robot DC Controller Board for ATmega328, L298N for Robotic Applications

  • RS-stocknr. 124-4689
  • Fabrikantnummer DFR0004
  • Fabrikant DFRobot
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Romeo Arduino Robot Control Board with Motor Driver

The first Romeo Arduino Control Board with Motor Drivers is based on the Arduino Uno with a socket to add bluetooth APC220 Radio Communication Module. Also the controller board has integrated input/output sensor pinout for connecting gravity compatible sensors and modules. The board benefits from the Arduino open source platform and includes open source codes. Suitable for Robotic applications.

Note: Bluetooth APC220 Radio Communication Module not included.

Features:
•DC Supply: USB Powered or External 7 V∼12 V dc
•DC Output: 5 V /3.3V DC and External Power Output
•Microcontroller: Atmega328
•Bootloader: Arduino Uno
•Compatible with the Arduino Uno pin mapping
•8 Channels 10-bit Analogue I/O
•USB interface
•5 key inputs
•Auto sensing/switching power input
•ICSP header for direct program download
•Serial Interface TTL Level
•Support Male and Female Pin Header
•Integrated sockets for APC220 RF Module and DF-Bluetooth Module
•Three I2C Interface Pin Sets(two 90°pin headers)
•2 way Motor Driver with 2A maximum current
•Gold plated printed circuit board
•Size: 90 x 80 x 14 mm(3.54"x3.15"x0.55")
•Weight: 60 g

Romeo family

Specificaties
Kenmerk Waarde
Product Name Romeo
Kit Classification Controller Board
157 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
26,34
(excl. BTW)
31,87
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,34 €
Related Products
Description:
The NFC click is an add-on board that carries the NXP PN7120, a Full NFC Forum-compliant controller with integrated firmware and NCI interface. Near Field Communication (NFC) devices are already used in contactless payment systems, electronic ticketing, smartcards and advertising. ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...
The Microchip EVB-LAN9252-HBI+ LAN9252 EtherCAT® Slave Controller (ESC) ...
Description:
The Microchip EVB-LAN9252-HBI+ LAN9252 EtherCAT® Slave Controller (ESC) Evaluation Kit is a development platform for you to explore the LAN9252 EtherCAT® IC. The board supports HBI/SPI+GPIO interfaces.The EVB-LAN9252-HBI+ features dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX ...
The X-NUCLEO-OUT01A1 is an Industrial Digital output expansion ...
Description:
The X-NUCLEO-OUT01A1 is an Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo boards.It provides an affordable and easy-to-use solution involving galvanic insulation embedded in industrial power switch driver applications. The Arduino™ UNO R3 connector compatibility allows to ...