Metrix MX 1 Analogue Multimeter 200A ac 1.5kV

  • RS-stocknr. 219-434
  • Fabrikantnummer MX1
  • Fabrikant Metrix
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Multimeters - MX1 and MX2B

The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV).
SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible to open the case (to change the battery or fuses). With protection of all ranges, the inputs support transients up to 6 kV.
37 functions and ranges: audible warning with rapid continuity, safety alarm, measurement up to 1500 V, diode test, measures 10 A DC with low voltage drop.
The MX2B is supplied with an AC current test probe (AM12) without circuit opening, up to 200 A.
Flexible, moulded, splash-proof case, with 80 mm linear scale.
AA alkaline batteries (stock no.: 591-225) also available separately from the catalogue.
Available in calibrated version.

Standards

class 2 IEC 61010-1, cat. III Pol-2

Specificaties
Kenmerk Waarde
Safety Category CAT III 600 V
Maximum Current Measurement 200A ac
Maximum Voltage Measurement 1.5kV
Best AC Voltage Accuracy ±2.5 %
Best DC Voltage Accuracy ±2 %
Maximum Resistance Measurement 20 kΩ
Best Resistance Measurement Accuracy ±10 %
Diode Test Capability Yes
Continuity Check Yes
Battery Type AA
Dimensions 40 x 98 x 150mm
Length 40mm
Width 98mm
Safety Category Voltage 600V
Safety Category Level CAT III
Weight 420g
Minimum Operating Temperature -10°C
Height 150mm
Model Number p MX 1
Maximum Operating Temperature +50°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27/02/2020, met een levertijd van 1 werkdag.
Prijs Each
206,00
(excl. BTW)
249,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
206,00 €
Related Products
Measurement of voltage, current, resistance and level High ...
Description:
Measurement of voltage, current, resistance and level High input resistance 10 MΩ for load-free voltage measurementAutomatic battery cut-out when device is closedHinged lid for inclined scale position and transport protectionAccuracy class 1.5.
Basic analogue multimeter with robust plastic casingBroad scope ...
Description:
Basic analogue multimeter with robust plastic casingBroad scope of application thanks to a large number of measurement rangesBattery for resistance measurement: 1x mignon cell AA 1.5 V.
The 2001 offers measurement technology which makes them ...
Description:
The 2001 offers measurement technology which makes them attractive options to higher-priced, high-end digital multimeters. Other 7 or 8 digit DMMs may average multiple readings to extend their resolution. The resolution specifications of the 2001 is based on a 28-bit ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...