MikroElektronika MIKROE-2912, PAC1921 Click for Step Motor Driver for MTS62C19A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CS
Productomschrijving

MikroElektronika 7 Click Stepper Motor Drive

The MikroElektronika stepper 7 click is a bipolar step motor driver. This stepper 7 click carries a port expander so that communication can be done with a minimal number of pins, through the mikroBUS™ SPI bus. It has an H-bridge bipolar step motor driver, which supports full and half step control modes. This click board™ is equipped with two integrated circuits. The step motor driver IC is the MTS62C19A, a dual full-bridge motor driver from Microchip.

Features and Benefits

Input voltage is 3.3V or 5V Interface: GPIO and SPI Offers thermal protection Protection against current shoot-through the H-Bridge Provides integrated kickback voltage protection Reasonable high current capability

Applications

Used for driving motor Used in safe step motor driver

Certifications

ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
For Use With Step Motor Driver
Featured Device MTS62C19A
Kit Name PAC1921 Click
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,27
(excl. BTW)
18,48
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
15,27 €
5 - 9
14,79 €
10 - 24
14,41 €
25 - 49
14,04 €
50 +
13,70 €
Related Products
Description:
The Stepper 3 click is an add-on board that driver unipolar stepper motors with precise controls. A high-voltage, high-current Darlington Transistor Array (Texas Instruments ULN2003A) operates the motor windings. Individual motor phases can be accessed separatelyExternal motor power supply up ...
The LV8713T is a microstepping motor driver IC ...
Description:
The LV8713T is a microstepping motor driver IC with built-in translator for easy operation. It supports full-step, half-step, 1/16-step, and 1/32-step resolution. The LV8713T is optimal for driving stepping motor of scanner and small printer. Single-channel PWM constant-current control stepping ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP ...
The X-NUCLEO-IHM14A1 motor driver expansion board is based ...
Description:
The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors. It represents an affordable, easy-to-use solution for driving stepper motors in your STM32 Nucleo project, implementing motor driving applications such as 2D/3D printers, robotics ...