MikroElektronika MIKROE-2893, DC Motor 8 Click Motor Driver for DC Motor Driver for MIC4605

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CS
Productomschrijving

MikroElektronika 8 Click DC Motor Drive

The MikroElektronika is an 8-click DC motor driver. This motor driver can drive DC motors with brushes, providing them with a significant amount of current and voltage up to 40V. The click has one control, which uses the PWM signal from the host MCU. This DC motor 8 click relies on the MIC4605, 85V half-bridge MOSFET driver with adaptive dead time and shoot-through protection, from Microchip. To regulate the speed of the motor rotation, it uses the half-bridge topology. The advance dead time circuitry that monitors the output stage, provides maximum switching efficiency and features an advanced technique to avoid the shoot-through current.

Features and Benefits

• Complete isolation of the output stage
• Good switching efficiency
• Input voltage is 3.3V or 5V
• Intelligent shoot-through protection mechanisms
• Interface: GPIO and PWM
• Low overall power consumption
• Output current is 1A

Applications

• Battery operated handheld tools
• Fans

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Analogue Function Motor Driver
For Use With DC Motor Driver
Featured Device MIC4605
Kit Name DC Motor 8 Click
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
17,00
(excl. BTW)
20,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
17,00 €
Related Products
Romeo BLE mini is small Arduino Robot Control ...
Description:
Romeo BLE mini is small Arduino Robot Control Board with motor driver and CC2540 Bluetooth 4.0 (BLE) chip. The board benefits from the Arduino open source platform and includes open source codes. With the integrated 2 way DC motor driver, ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...
The LV8741V is a 2-channel H-bridge driver IC ...
Description:
The LV8741V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports Full-step, Half-step (full torque), Half-step, and Quarter-step resolution, and two channels of a brushed motor driver, which ...
The ON Semiconductor STK672-440BNGEVB Evaluation Board features the ...
Description:
The ON Semiconductor STK672-440BNGEVB Evaluation Board features the STK672-440A-E (RS 774-0862) 2-phase stepper motor driver with PWM current control.Its 4-phase distribution stepping motor controller supports five excitation methods: 2 phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase excitations. ...