Spirax Sarco Air Vent, AE30A 1/2 in BSPP 1/4 in BSP

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Automatic Air Vent AE30A

Air eliminators AE30 and AE30A have been specifically designed for the removal of air and other non-condensible gases from industrial and commercial hot and chilled water systems. This then improves the circulation of the pressurized liquids. Typical areas where this can be applied are, suction lines to pumps, water storage tanks, mixing tanks and cold water lines.

Materials of construction comply with the requirements of the Water Research Centre (WRc) and M&E3
Reliable, leak free operation
AE30A has inbuilt check valve
Compact body design
One valve covers all operating conditions making selection and replacement simple
Simple lever and float operation

Approvals

WRc; M&E3

Specificaties
Kenmerk Waarde
Female Connection 1/2 in BSPP
Male Connection 1/4 in BSP
Body Material Copper Alloy
Height 105mm
Maximum Working Pressure 10 bar
Female Thread Size 1/2in
Male Thread Size 1/4in
Thread Standard BSP
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
261,50
(excl. BTW)
316,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
261,50 €
Related Products
The VB21 vacuum breakers are simple and reliable ...
Description:
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or "break" an unwanted vacuum condition, restoring the atmospheric pressure.This device is particularly suitable for steam heated units of small and medium volume as heat exchangers, heating coils, ...
The AE16SS stainless steel air eliminator removes air ...
Description:
The AE16SS stainless steel air eliminator removes air from HVAC systems and is also suitable for non corrosive and/or dangerous liquids providing that their specific weight is not less than 0,75Kg/dm3.This ball float type automatic air eliminator can be used ...
Brass bodied, normally closed solenoid valves. Coil changed ...
Description:
Brass bodied, normally closed solenoid valves. Coil changed easily with valve in placeTwo female ports and a 1/8 in. male vent portCoil can be locked in four by 90° positions or move free between, as requiredBrass body and FKM high ...
The Burkert 3-port 1/4in G female solenoid valve ...
Description:
The Burkert 3-port 1/4in G female solenoid valve is a vibration-proof, bolted coil system. It has high-quality seal material FKM as standard. It has a banjo-threaded connection for direct mounting on pneumatic valves. The stopper and plunger guide tube are ...