ams Air Quality Sensor

  • RS-stocknr. 173-0309
  • Fabrikantnummer IAQ-CORE P
  • Fabrikant ams
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

iAQ-Core Indoor Air Quality Sensor Modules

The iAQ-Core is a compact module for determining indoor air quality. The MEMS technology sensor measures a broad range of VOCs (Volatile Organic Compounds) yielding a Total Volatile Organic Compound (TVOC) reading.

Output: 450 to 2000ppm CO2 equivalent and 125 to 600ppb TVOC equivalent
Resolution: 16-bit
Automatic baseline correction
Communication: 100kHz serial I²C bus
Power supply: 3.3V ± 0.1V, max 20mV ripple
Applications: Smart Home, HVAC, Internet of Things (IoT) remote sensing

RS Product Codes
102-4162 iAQ-Core C Continuous operation
102-4163 iAQ-Core P Pulsed operation

Specificaties
Kenmerk Waarde
Dimensions 15.2 x 17.8 x 4.3mm
Height 4.3mm
Length 15.2mm
Width 17.8mm
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +50 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 90)
27,147
(excl. BTW)
32,848
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
90 +
27,147 €
2.443,23 €
*prijsindicatie
Related Products
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
A gas sensor from Figaro using a micro-bead ...
Description:
A gas sensor from Figaro using a micro-bead structure suitable for the detection of both methane and carbon monoxide. The device is housed in a compact 3-pin PCB mounting package. • High sensitivity and selectivity to both methane and carbon ...
The LPM2610 from Figaro is a pre-calibrated sensor ...
Description:
The LPM2610 from Figaro is a pre-calibrated sensor module for LP (liquefied petroleum) gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2610-D00 gas sensor which incorporates a filter to reduce ...
Gas sensors from Figaro for the detection of ...
Description:
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used ...