Figaro Air Quality Sensor

  • RS-stocknr. 134-6678
  • Fabrikantnummer TGS816-A00
  • Fabrikant Figaro
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TGS813 & TGS816 Combustible Gas Sensors

Combustible gas sensors from Figaro utilising tin dioxide (SnO2) semiconductor technology providing an output proportion to gas concentration. These low cost sensors can detect a wide range of combustible gases making them an ideal choice for a wide variety of applications. Type TGS813 has a nylon 66 housing and base; type TGS816 has a metal housing with a ceramic base which is capable of withstanding temperatures of up to 200°C. Typical applications include domestic gas leak detectors and alarms, and portable gas detectors.

• High sensitivity to methane, propane and butane
• Long life and low cost
• Utilises simple electrical circuit

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specificaties
Kenmerk Waarde
Gases Detected Butane, Methane, Propane
Dimensions 19.5 (Dia.) x 13.5mm
Weight 7.7g
Width 19.5 (Dia.)mm
Height 13.5mm
25 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
90,11
(excl. BTW)
109,03
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
90,11 €
10 - 24
86,50 €
25 +
82,89 €
Related Products
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
A gas sensor from Figaro using a micro-bead ...
Description:
A gas sensor from Figaro using a micro-bead structure suitable for the detection of both methane and carbon monoxide. The device is housed in a compact 3-pin PCB mounting package. • High sensitivity and selectivity to both methane and carbon ...
A compact PCB mounting gas sensor from Figaro ...
Description:
A compact PCB mounting gas sensor from Figaro with high sensitivity to alcohol and organic solvent vapours. • Low power consumption• Long life and low cost• Uses simple electrical circuit.
The NGM2611 from Figaro is a pre-calibrated sensor ...
Description:
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence ...