Figaro Air Quality Sensor

  • RS-stocknr. 134-6671
  • Fabrikantnummer TGS2602-B00
  • Fabrikant Figaro
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TGS2600/2602/2603 Air Contaminants Sensors

Compact PCB mounting gas sensors from Figaro for use in the detection of gaseous air contaminants. Three types are available: TGS2600 has high sensitivity to gases such as hydrogen, ethanol and carbon monoxide; TGS2602 has high sensitivity to VOCs and odorous gases such as ammonia and hydrogen sulphide; TGS2603 has high sensitivity to food odours, and to amine-series and sulphurous odour gases. All of the sensors feature low power consumption, long operating life and utilize simple electrical circuitry.

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specificaties
Kenmerk Waarde
Gases Detected Air Contaminants
Dimensions 9.2 (Dia.) x 7.8mm
Weight 1.1g
Height 7.8mm
Width 9.2 (Dia.)mm
11 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
21,85
(excl. BTW)
26,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
21,85 €
2 - 4
20,39 €
5 +
19,17 €
Related Products
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
The LPM2610 from Figaro is a pre-calibrated sensor ...
Description:
The LPM2610 from Figaro is a pre-calibrated sensor module for LP (liquefied petroleum) gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2610-D00 gas sensor which incorporates a filter to reduce ...
Gas sensors from Figaro for the detection of ...
Description:
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used ...