Figaro Air Quality Sensor

  • RS-stocknr. 134-6649
  • Fabrikantnummer TGS2444-A00
  • Fabrikant Figaro
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TGS2444 Ammonia Gas Sensor

The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The device displays good selectivity to ammonia, making it suitable for critical safety-related applications such as the detection of ammonia leaks in refrigeration systems and ammonia detection in the agricultural field.

• Compact PCB mounting sensor
• Low power consumption
• High sensitivity and selectivity to ammonia (NH3)

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specificaties
Kenmerk Waarde
Gases Detected Ammonia
Dimensions 9.2 (Dia.) x 7.8mm
Weight 1.2g
Maximum Operating Temperature +50 °C
Height 7.8mm
Minimum Operating Temperature -40 °C
Width 9.2 (Dia.)mm
58 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
90,11
(excl. BTW)
109,03
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
90,11 €
10 - 24
86,50 €
25 +
82,89 €
Related Products
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
Gas sensors from Figaro for the detection of ...
Description:
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used ...
Catalytic type PCB mounting gas sensors from Figaro ...
Description:
Catalytic type PCB mounting gas sensors from Figaro with high sensitivity to both Methane and LP gases such as Butane and Propane. The TGS6812 type is also sensitive to Hydrogen making it an ideal choice for applications where leakage from ...
The NGM2611 from Figaro is a pre-calibrated sensor ...
Description:
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence ...