Figaro Air Quality Sensor

  • RS-stocknr. 134-6640
  • Fabrikantnummer TGS2610-C00
  • Fabrikant Figaro
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TGS2610/2611/2612 Methane and LP Gas Sensors

Compact PCB mounting gas sensors from Figaro for use in the detection of methane and LP (liquefied petroleum) gas products. Type TGS2610 has high sensitivity to LP gas and its components such as propane and butane; type TGS2611 has high sensitivity to methane; TGS2612 has high sensitivity to methane, propane and butane with similar sensitivity (at same %LEL levels) for both methane and LP gases. Parts with suffix –C00 have a smaller package size with a faster response time; parts with –D00 & -E00 suffix have a larger package incorporating filter materials to reduce the effects of interference gases.

• Compact 4-lead TO-5 package
• Low power consumption
• Long life and low cost
• Uses simple electrical circuit

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specificaties
Kenmerk Waarde
Gases Detected Butane, Propane
Dimensions 9.2 (Dia.) x 7.8mm
Weight 1.2g
Width 9.2 (Dia.)mm
Height 7.8mm
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,85
(excl. BTW)
26,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
21,85 €
5 - 9
20,39 €
10 +
19,17 €
Related Products
Battery operable electrochemical gas sensors from Figaro for ...
Description:
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination ...
The TGS2444 gas sensor from Figaro utilises a ...
Description:
The TGS2444 gas sensor from Figaro utilises a multilayer sensor structure with a tin dioxide (SnO2) sensing layer. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration. The ...
Gas sensors from Figaro for the detection of ...
Description:
Gas sensors from Figaro for the detection of Chlorofluorocarbon (CFC) or Halocarbon gases. These devices utilise tin dioxide (SnO2) semiconductor technology to provide an output proportion to gas concentration. The sensors have high sensitivity to the refrigerant gases commonly used ...
The NGM2611 from Figaro is a pre-calibrated sensor ...
Description:
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence ...