LCBSBM-4-01 ART, 6.4mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base

  • RS-stocknr. 220-787
  • Fabrikantnummer LCBSBM-4-01 ART
  • Fabrikant Richco
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Miniature Adhesive Backed Supports

PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm

Specificaties
Kenmerk Waarde
Overall Height 15.1mm
Body Height 6.4mm
Support Base Dimensions 12.7 x 12.7mm
PCB Hole Diameter 3.18mm
PCB Thickness 1.57mm
Material Nylon
Support Base Length 12.7mm
Support Base Width 12.7mm
10400 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
31500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,156
(excl. BTW)
0,189
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 450
0,156 €
7,80 €
500 - 950
0,15 €
7,50 €
1000 - 2450
0,145 €
7,25 €
2500 +
0,133 €
6,65 €
*prijsindicatie
Related Products
ApplicationsFor use in multi-level applications. Self-adhesive base eases ...
Description:
ApplicationsFor use in multi-level applications. Self-adhesive base eases assembly. Fixed to the panel by clip.
Spacers for printed circuit boards featuring an adhesive ...
Description:
Spacers for printed circuit boards featuring an adhesive base (0.8 mm).
PCB spacers with an adhesive base (0.8 mm ...
Description:
PCB spacers with an adhesive base (0.8 mm thick).Small dimensions, adhesive surface area just 12.7 x 12.7 mm.
PCB supports moulded in nylon, with an adhesive ...
Description:
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fittingThe board to be supported is retained securely by the locking barb, but may be removed when requiredThe support can be permanently ...