SCA1000-D01-004 Murata, 2-Axis Accelerometer, SPI, 12-Pin SMD

  • RS-stocknr. 799-9231
  • Fabrikantnummer SCA1000-D01-004
  • Fabrikant Murata
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FI
Productomschrijving

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata

Specificaties
Kenmerk Waarde
Sensor Type Accelerometer
Number of Axis 2
Technology Digital
Mounting Type Surface Mount
Interface Type SPI
Maximum Operating Supply Voltage 5.25 V
Minimum Operating Supply Voltage 4.75 V
Package Type SMD
Sensitivity 1.2V/g
Pin Count 12
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/01/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
39,71
(excl. BTW)
48,05
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
39,71 €
5 - 9
35,75 €
10 - 24
34,16 €
25 +
32,96 €
Related Products
Description:The LSM6DSOX is a system-in-package featuring a 3D ...
Description:
Description:The LSM6DSOX is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope boosting performance at 0.55 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DSOX supports main ...
The LIS3DSH is an ultra-low-power high-performance three-axis linear ...
Description:
The LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement autonomous applications. The LIS3DSH has dynamically selectable full scales of ±2g/±4g/±6g/±8g/±16g and is capable of ...
The Evaluation Board is connected to PC's USB ...
Description:
The Evaluation Board is connected to PC's USB port and operated through a Graphical User Interface (GUI) softwareMurata MEMS Evaluation Board supports various types of Murata MEMS sensorsThe MEMS sensors are connected to the Evaluation Board by using a chip ...
The US1881 is a Hall-effect latch designed in ...
Description:
The US1881 is a Hall-effect latch designed in mixed signal CMOS technology that integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.Thanks to its wide operating ...