SCA610-E28H1A-004 Murata, Accelerometer, 8-Pin SMD

  • RS-stocknr. 171-0673
  • Fabrikantnummer SCA610-E28H1A-004
  • Fabrikant Murata
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FI
Productomschrijving

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata

Specificaties
Kenmerk Waarde
Sensor Type Accelerometer
Number of Axis 1
Technology Analogue
Mounting Type Surface Mount
Maximum Frequency Response 80Hz
Minimum Frequency Response 20Hz
Maximum Operating Supply Voltage 5.25 V
Minimum Operating Supply Voltage 4.75 V
Package Type SMD
Sensitivity 1.2V/g
Pin Count 8
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 4)
41,48
(excl. BTW)
50,19
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
4 +
41,48 €
165,92 €
*prijsindicatie
Related Products
ST’s MEMS accelerometers include analogue and digital sensors ...
Description:
ST’s MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features include ultra-low-power mode, auto wake-up function and FIFO buffer that can be used to ...
Description:The LSM6DSOX is a system-in-package featuring a 3D ...
Description:
Description:The LSM6DSOX is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope boosting performance at 0.55 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DSOX supports main ...
The LIS2HH12 is an ultra-low-power high-performance three-axis linear ...
Description:
The LIS2HH12 is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “pico” family. The LIS2HH12 has full scales of ±2g/±4g/±8g and is capable of measuring accelerations with output data rates from 10 Hz to 800 Hz. The self-test capability ...
The Memsic 2125 is a low-cost thermal accelerometer ...
Description:
The Memsic 2125 is a low-cost thermal accelerometer chip capable of measuring tilt, collision, static and dynamic acceleration, rotation and vibration with a range of ±3g on two axes. Measures ±3g on each axisCommunication: TTL/CMOS compatible 100Hz PWM output signal ...