Mellor Electric Shaded Pole AC Geared Motor, Clockwise, 230 V ac, 160 rpm, 24 W

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Shaded Pole Motor, Type 100

A higher power shaded pole motor available with or without a gearbox, suitable for many applications requiring a low cost unit, which is quiet running and has compact dimensions. Typical applications include test equipment, industrial process equipment. Class F insulation and a thermal cut-out protection. Motor without gearbox has a dual output shaft

Note

This motor is not rated for continuous operation. Maximum on time 20 minutes. Minimum off time 40 minutes.

//media.rs-online.com/t_line/L248364-01.gif
//media.rs-online.com/t_line/LD248364-01.gif
//media.rs-online.com/t_line/LE248364-01.gif
//media.rs-online.com/t_line/LE248365-01.gif
Specificaties
Kenmerk Waarde
Output Speed 160 rpm
Supply Voltage 230 V ac
AC Motor Type Shaded Pole
Power Rating 24 W
Rotation Clockwise
Maximum Output Torque 1.68 Ncm
Gearhead Type Spur
Length 62mm
Width 50mm
Depth 73mm
Dimensions 62 x 50 x 73 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
76,62
(excl. BTW)
92,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
76,62 €
Related Products
Range of single-directional (clockwise or anticlockwise) synchronous geared ...
Description:
Range of single-directional (clockwise or anticlockwise) synchronous geared motors.These geared motors have a non-return system to prevent problems occurring when stopping.
Range of unidirectional (clockwise) synchronous geared motors.These geared ...
Description:
Range of unidirectional (clockwise) synchronous geared motors.These geared motors have a non-return system to prevent problems occurring when stopping.
Direction of rotation controlled by phase-shifting.Speed of rotation ...
Description:
Direction of rotation controlled by phase-shifting.Speed of rotation depends on supply frequency and load applied to the output shaft.Sintered bearings, lubricated for life.Facing the shaft, rotation is clockwise.Output shaft Ø 8 mm with flat end.
Reversible ac. synchronous motor & gearbox combinationTypical applications ...
Description:
Reversible ac. synchronous motor & gearbox combinationTypical applications where constant speed is required, actuator, valves, printing equipmentMotor position can be changed on the gearbox to enable the cable route to be optimised.