Power Integrations, AC-DC Converter 7A, 5 V dc 11-Pin, eSOP-12 TOP271KG
- RS-stocknr.:
- 123-5494
- Fabrikantnummer:
- TOP271KG
- Fabrikant:
- Power Integrations
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 123-5494
- Fabrikantnummer:
- TOP271KG
- Fabrikant:
- Power Integrations
Datasheets
Wetgeving en conformiteit
Productomschrijving
TOPSwitch-JX series Offline AC-DC Converters
The Power Integrations TOPSwitch-JX series offers a single-package solution to cost-effective off-line AC-DC converter design. The devices integrate a high-voltage power MOSFET and switched current source, multi-mode PWM controller, oscillator and comprehensive protection plus control circuitry into a compact monolithic package. The range includes both through-hole and SMT mounted options and power ratings of up to 177W.
• Energy efficient over entire load range; no-load power <100 mW at 265 VAC
• Multi-mode PWM control maximizes efficiency at all loads
• Accurate programmable current limit
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• 725V rated power MOSFET
• Auto-restart limits power delivery to <3% during overload faults
• Output over-voltage, over-current and short-circuit protection
• Accurate thermal shutdown with large hysteresis
Package Options:
• eDIP-12 package with low-profile horizontal orientation for ultra-slim designs
• eSIP-7C package with vertical orientation for minimum PCB footprint
• eSOP-12 low-profile SMT package for ultra-slim designs
• Multi-mode PWM control maximizes efficiency at all loads
• Accurate programmable current limit
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• 725V rated power MOSFET
• Auto-restart limits power delivery to <3% during overload faults
• Output over-voltage, over-current and short-circuit protection
• Accurate thermal shutdown with large hysteresis
Package Options:
• eDIP-12 package with low-profile horizontal orientation for ultra-slim designs
• eSIP-7C package with vertical orientation for minimum PCB footprint
• eSOP-12 low-profile SMT package for ultra-slim designs
AC-DC Converters, Power Integrations
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Input Voltage | 265 V ac |
| Maximum Output Voltage | 5 V dc |
| Mounting Type | Surface Mount |
| Pin Count | 11 |
| Dimensions | 10.16 x 8.89 x 2.34mm |
| Maximum Output Current | 7A |
| Package Type | eSOP-12 |
| Input Voltage Range | 85 → 265 V ac |
| Current Limit | 5.53A |
| Minimum Input Voltage | 85 V ac |
| Maximum Operating Temperature | +150 °C |
| Length | 10.16mm |
| Width | 8.89mm |
| Height | 2.34mm |
| Minimum Operating Temperature | -40 °C |
| Output Voltage Range | 5 V dc |
| Output Current Range | 7 A |
| Typical Operating Supply Voltage | 230 V ac |
| Operating Temperature Range | -40 → +150 °C |