3M Circular Abrasive Brush, 75mm Diameter
- RS-stocknr.:
- 154-918
- Fabrikantnummer:
- FF-ZS 07217
- Fabrikant:
- 3M
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
41 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 18,98
(excl. BTW)
€ 22,97
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 18,98 |
| 10 - 24 | € 18,25 |
| 25 + | € 17,45 |
- RS-stocknr.:
- 154-918
- Fabrikantnummer:
- FF-ZS 07217
- Fabrikant:
- 3M
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- ES
Productomschrijving
Scotch-Brite™ Shaft Mounted Flap Brush FF-ZS, 75 mm x 45 mm
Scotch-Brite™ Shaft Mounted Flap Brushes are made of flaps of non-woven material mounted on a spindle.
Use Scotch-Brite™ Shaft Mounted Flap Brush to give a fine uniform finish to a variety of metal work pieces, without leaving chatter marks. The fine, matt scratch pattern offered by our shaft mounted flap brushes results in a finer finish compared to a combi wheel.
Features and Benefits
• With a fine, matt scratch pattern that produces a finer finish than a combi wheel
• Designed for use on all metals
• Give a uniform finish to work pieces, without leaving chatter marks
• Suitable for light deburring
• Designed for use on all metals
• Give a uniform finish to work pieces, without leaving chatter marks
• Suitable for light deburring
Typical Applications
• Give a fine uniform finish to a variety of metal work pieces
3M Abrasive Brush, Maroon Colour, Very Fine Grade - FF-ZS 07217
Put the final touches on your metallic workpieces with this abrasive brush from 3M. It's made of aluminium oxide to strip away rust and burrs, making short work of tough cleaning tasks. A maximum safe speed of 8,500rpm means large surfaces can be covered in no time. As the brush uses a non-woven carrier, it resists disruptive loading to stay sharp for longer.
Features & Benefits
• Circular shape tackles rounded edges for even coverage
• No scratch or chatter marks, leaving a clean finish
• Fits a standard 1/4" tool shank for wide compatibility and easy setup
• Waterproof non-woven backing to handle wet and dry applications
• No scratch or chatter marks, leaving a clean finish
• Fits a standard 1/4" tool shank for wide compatibility and easy setup
• Waterproof non-woven backing to handle wet and dry applications
Applications
• Metalworking
• Rust removal
• Automotive bodywork
• Rust removal
• Automotive bodywork
At which stage of my process should I use this abrasive brush?
As it has a very fine grade abrasive, you should use this product to finish off your surface preparation task.
Specificaties
Kenmerk | Waarde |
|---|---|
| Brush Type | Circular |
| Grit Size | P80 |
| Diameter | 75mm |
| Model | Scotch-Brite |
| Maximum Safe Speed | 8500rpm |