RS PRO 1.75mm Natural FLEX 45 3D Printer Filament, 500g
- RS-stocknr.:
- 832-0523
- Fabrikant:
- RS PRO
2 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 43,65
(excl. BTW)
€ 52,82
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 2 | € 43,65 |
| 3 + | € 41,47 |
- RS-stocknr.:
- 832-0523
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- NL
Productomschrijving
RS PRO TPC Flex 3D Printer Filament
A strong, flexible and easy to print filament for 3D printing with 92% translucency and FCA (Food Contact Acceptable) approved. Suitable for with bowden setup style printers such as the Ultimaker 2.
TPC 45 combines a high degree of flexibility, strong mechanical strength with resistance to extreme temperatures and chemicals. On top of which the TPC 45 high performance Thermoplastic Co-Polyester has a high carbon content of renewable materials resulting in les environmental impact.
Flex TPC 45 can be used on most common desktop FDM or FFF technology 3D printers.
Benefits
- Good resistance to chemicals and extreme temperatures
- Thermoplastic Co-Polyester
- High Carbon content
- Excellent UV resistance
- Printed products can withstand a lot of mechanical stress without breaking
- Unique balance of flexibility, sustained high temperature and chemical resistance
- Very low odour while printing
- Low moisture absorption
Recommended Printing Conditions
- Extruder temperature: 230 – 255 °C
- Bed temperature: 23 – 70 °C
- Bed prep: Hairspray or Glue stick on clean glass
- Print Speed: Flexible 88A prints slower, about 20 mm/s to start, then increase as you become more familiar with the material
- Experience Level: Moderate to Advanced. Printing with elastomers is a bit more complicated than hard plastics and generally requires more experience and an extruder purposefully built or modified to handle flexible filaments
- TPC FLEX 45 can be used on most common desktop FDM or FFF technology 3D printers
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Specificaties
Kenmerk | Waarde |
|---|---|
| Printing Technology | FDM |
| Machine Specific | No |
| Colour | Natural |
| For Use With | Common Desktop 3D Printers |
| Weight | 500g |
| Diameter | 1.75mm |
| Printing Material | FLEX 45 |
- RS-stocknr.:
- 832-0523
- Fabrikant:
- RS PRO