Verbatim 1.75mm White ABS 3D Printer Filament, 1kg
- RS-stocknr.:
- 822-6487
- Fabrikantnummer:
- 55011
- Fabrikant:
- Verbatim
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 822-6487
- Fabrikantnummer:
- 55011
- Fabrikant:
- Verbatim
Wetgeving en conformiteit
- Land van herkomst:
- JP
Productomschrijving
Verbatim 3D Printing Filament ABS
Top grade 3D printing filament, manufactured to very tight tolerances. Made from the highest quality materials to ensure consistent feeding and stable prints
ABS (Acrylonitrile Butadiene Styrene) filament is a copolymer which is made of styrene, acryl and butadiene
It is impact resistant and tough
Extrusion temperature: 230-240ﾟ C (recommended)
All filament is delivered in a vacuum bag, with desiccant, wound onto a spool
Heated build platform recommended (80 to 120ﾟC)
Usage: Print only in a well-ventilated area
Keep material sealed until ready for use
Store unused material in the provided re-sealable bag in a cool dark place
It is impact resistant and tough
Extrusion temperature: 230-240ﾟ C (recommended)
All filament is delivered in a vacuum bag, with desiccant, wound onto a spool
Heated build platform recommended (80 to 120ﾟC)
Usage: Print only in a well-ventilated area
Keep material sealed until ready for use
Store unused material in the provided re-sealable bag in a cool dark place
Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend
Note
Quality Advice: To maintain our product quality we recommend to remove the filament from your printer if not used for more than a few hours and store it in a dry place
Specificaties
Kenmerk | Waarde |
|---|---|
| Printing Technology | FDM |
| Machine Specific | No |
| Colour | White |
| Weight | 1kg |
| Diameter | 1.75mm |
| Printing Material | ABS |