Ultimaker PTFE Coupler for use with 2 Extended, Go, Ultimaker 2

  • RS-stocknr. 908-2953
  • Fabrikantnummer 1364
  • Fabrikant Ultimaker
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: NL
Productomschrijving

PTFE Coupler for Ultimaker 2

This is the Ultimaker 2 PTFE Glass filled coupler

Note

This part is ONLY compatible with the Ultimaker 2

Ultimaker Accessories

Specificaties
Kenmerk Waarde
Product Type PTFE Coupler
For Use With Go, Ultimaker 2, 2 Extended
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
31,46
(excl. BTW)
38,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
31,46 €
Related Products
The Olsson block brass Jet nozzles have a ...
Description:
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip ...
The Olsson block Stainless Steel Jet nozzle has ...
Description:
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them ...
Hot-End HeatCore Double Drive Gear designed exclusively for ...
Description:
Hot-End HeatCore Double Drive Gear designed exclusively for the Witbox 2 with easy access to the PTFE tube for replacement. 1 x Hot-End with ceramic heating cartridge 40W 12V and NTC 100K thermistorConnectors suitable for Witbox 21 x bag of ...
The Ultimaker print core range will be offered ...
Description:
The Ultimaker print core range will be offered in type AA. It gives extra-fine detail prints, with the added advantage of dual extrusion - enabling two-colour prints, or various material combinations with extra-fine detail. Different nozzle sizes can be quickly ...