Ultimaker Print Core BB for use with Ultimaker 3, Ultimaker 3 Extended, Ultimaker S5 0.4mm

  • RS-stocknr. 173-4772
  • Fabrikantnummer 9530
  • Fabrikant Ultimaker
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: NL
Productomschrijving

Ultimaker 3D Printing Parts & Accessoriess

The Ultimaker print core range will be offered in type AA. It gives extra-fine detail prints, with the added advantage of dual extrusion - enabling two-colour prints, or various material combinations with extra-fine detail. Different nozzle sizes can be quickly and easily hot-swapped, without the need to use any tools. Potential use cases include microfluidics, dental model casting, architectural models, and fine mechanical parts, such as small gears.

Features and Benefits

Better 3D printing results with a new silicone cover to protect the extruder It chooses 0.25 or 0.4mm for a higher level of detail and surface quality It gives quality, consistent results with customized nozzle geometries for different material types: non-abrasive plastics (AA), water-soluble support (BB), and abrasive composites It offers free support – guaranteed for a lifetime Maintain the perfect temperature for an even better quality print – with automatic, accurate temperature readings Nozzle size is 0.4mm Quickly swap print cores and switch between different material combinations to minimize downtime

Specificaties
Kenmerk Waarde
Product Type Print Core BB
For Use With Ultimaker 3, Ultimaker 3 Extended, Ultimaker S5
Nozzle Size 0.4mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
25 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
136,33
(excl. BTW)
164,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
136,33 €
Related Products
The Olsson block brass Jet nozzles have a ...
Description:
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip ...
The Olsson block Stainless Steel Jet nozzle has ...
Description:
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them ...
The Robox replacement Dual Material head consists of ...
Description:
The Robox replacement Dual Material head consists of 2 independently controlled heated nozzles each with the unique Robox needle valve control system. Allows you to print with 2 materials or 2 colours in the same material on the same layer. ...
BQ original Classic Hot-end HeatCore equipped with thermal ...
Description:
BQ original Classic Hot-end HeatCore equipped with thermal connector and a 100k NTC resistor. MK7 Nozzle Diameter 0.4 mm, compatible for 1.75 filamentThermobarrier including Teflon inlay (tube)Fast connecting 12 V 40W ceramic heater cartridge with connectorFast connecting 100K thermistor (NTC) ...