Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.8mm

  • RS-stocknr. 110-1985
  • Fabrikantnummer OBN004
  • Fabrikant Ultimaker
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: NL
Productomschrijving

Ultimaker 2 Jet Nozzles

The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.

With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.

Use the 0.25mm brass nozzle to print small detailed prints, it's an expert nozzle (RS 110-1982)
The 0.4mm (RS 110-1983) is the standard size for a lot of 3D printers
If you print in wood filaments, this brass nozzle of 0.8mm is perfect for the job (RS 110-1985)

Note

This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.

Ultimaker Accessories

Specificaties
Kenmerk Waarde
Product Type Nozzle
For Use With Olsson Block, Ultimaker 2+
Nozzle Material Brass
Nozzle Size 0.8mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
26,00
(excl. BTW)
31,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
26,00 €
Related Products
The CNC worktable from Zmorph is the best ...
Description:
The CNC worktable from Zmorph is the best choice for CNC and laser works. With a sturdy aluminium construction and pre-set holes, the CNC worktable provides a stable flat surface with easy clamping of wood, acrylic glass, modelling boards, PCB ...
This super-flat 3D printing platform has best-in-class resistance ...
Description:
This super-flat 3D printing platform has best-in-class resistance to thermal and mechanical damage - all thanks to top quality borosilicate glass used for the printing surface. The Zmorph VX 3D printing worktable heats up to 100°C, making it suitable for ...
Fully assembled full metal hotend, especially designed to ...
Description:
Fully assembled full metal hotend, especially designed to ensure high performance and reliability. It is equipped with a 24V heater cartridge and a thermistor. Besides the 1,0mm diameter nozzle, the hotend is mounted with a special aluminium block, which ensures ...
This high-performance Model 1 extruder from MakerBot to ...
Description:
This high-performance Model 1 extruder from MakerBot to work with the Method 3D printer. It's built for high-speed printing without compromising on accuracy. A longer thermal core provides heat up time of 60 seconds letting you start your project quicker. ...