Development Kits

Filters

1 - 8 van 8 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Accessory Type For Use With
RS-stocknr. 894-8981
FabrikantnummerAFIM-1001
FabrikantZF
25,48 €
Each
Aantal stuks
Wireless Switch Generator Wireless Snap and Rocker Switches
RS-stocknr. 873-6687
FabrikantnummerAFZE-1005
FabrikantZF
13,64 €
Each
Aantal stuks
Receiver Module with Wire Antenna 868 MHz Cherry Energy Harvesting Switches
RS-stocknr. 873-6684
FabrikantnummerAFZE-1003
FabrikantZF
68,15 €
Each
Aantal stuks
Receiver Board Energy Harvesting Wireless Switch
RS-stocknr. 175-4669
FabrikantnummerCY8CKIT-062-WIFI-BT
79,14 €
1 Box of 1
Box(es)
Pioneer Kit PSoC 6 MCU
RS-stocknr. 789-7208
FabrikantnummerAFIK-1002
FabrikantZF
222,03 €
1 Box of 1
Box(es)
Evaluation Kit Wireless Switch Applications
RS-stocknr. 878-0319
FabrikantnummerT201-DEV1
FabrikantGrayhill
169,52 €
Each
Aantal stuks
Multi-Touch Control Wheel Development Kit Clean Room Controls, Medical Device, Off-Highway Vehicles
RS-stocknr. 175-3534
FabrikantnummerYSTBS3A1E10
40,70 €
1 Box of 1
Box(es)
Target Board Renesas Synergy S3A1 Microcontroller
RS-stocknr. 873-6678
FabrikantnummerAFIG-0007
FabrikantZF
12,49 €
Each
Aantal stuks
RF Generator Energy Harvesting Switch

Development Kits

A development kit is a collective term referring to accessories related to the installation, evaluation, generation and add-on components of switch technologies. 

 

What are development kits used for?

Your choice of development kit depends on the type of switch technology required. Pairing the right development kit with the corresponding switch system is essential to get the most benefit from it. Common switch technology categories include dimmers, toggles, rockers, pressure and reed switches. You can also get development kits for micro-switches. 

 

Typical applications include industrial and building automation, smart technologies and medical devices.

 

Types of development kits

Three broad ranges of kits are available, each with a different purpose.

  • Evaluation kits allow for testing of energy harvesting technologies. They also measure specific parameters, for example signal strength and range.
  • Generation kits convert mechanical energy into electrical energy for data transfer in snap and rocker switches. This eliminates the need for batteries.
  • Add-on kits consist of adaptors like receiver modules and connectors for wall mounting capabilities. Flexible pairing enables several receivers to operate via one switch and vice versa, increasing usage flexibility. 
Related Products
The ultra-compact MiniCore RCM6700 is ideal for today’s ...
Description:
The ultra-compact MiniCore RCM6700 is ideal for today’s smart energy initiatives as well as other applications that require a cost effective web-enabled device server. Rabbit® 6000 processor running up to 200MHz10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules1MB of ...
The LIN Serial Analyser development system enables a ...
Description:
The LIN Serial Analyser development system enables a PC to communicate with a LIN (Local Interface Network) bus. The PC program uses a graphical user interface (GUI) to enter and display message frames occurring on the target bus. Connects to ...
These cables provide a fast and simple method ...
Description:
These cables provide a fast and simple method to convert RS-485 level serial UART to USB. The USB connector contains a small circuit board featuring the FTDI FT232RQ (RS 730-0168) serial UART interface IC to handle all the USB signalling ...
A comprehensive kit of equipment and consumables including ...
Description:
A comprehensive kit of equipment and consumables including single sided PCB material to 100mm x 220mm. PCB design software and a PCB drill should be considered separately purchased additions to this kit. Small UV unit, with timer, for exposures to ...