Cable Transceivers

Filters

41 - 45 van 45 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Number of Transmitters Number of Receivers Number of Transceivers Number of Drivers per Line Number of Receivers per Line Data Rate Package Type Pin Count Transmitter Signal Type Receiver Signal Type Interface Standards Power Supply Type Typical Single Supply Voltage Dimensions
RS-stocknr. 662-5260
FabrikantnummerTSB41AB3PFP
4,34 €
Each
Aantal stuks
1 1 - - - - HTQFP 80 - - IEEE 1394-1995, IEEE 1394a-2000 Single - 12 x 12 x 1mm
RS-stocknr. 760-3338
FabrikantnummerLTM2882IY-3#PBF
FabrikantAnalog Devices
16,88 €
Each
Aantal stuks
2 2 2 2 2 10Mbps BGA 32 Single Ended Single Ended RS-232 Single 3.3 V 15 x 11.25 x 3.42mm
RS-stocknr. 760-3306
FabrikantnummerLTM2881IV-3#PBF
FabrikantAnalog Devices
16,88 €
Each
Aantal stuks
1 1 1 1 1 20Mbps LGA 32 Single Ended Differential RS-422/ RS-485 Single 3.3 V 15 x 11.25 x 2.8mm
RS-stocknr. 760-3312
FabrikantnummerLTM2881IY-5#PBF
FabrikantAnalog Devices
17,03 €
Each
Aantal stuks
1 1 1 1 1 20Mbps BGA 32 Single Ended Differential RS-422/ RS-485 Single 5 V 15 x 11.25 x 3.42mm
RS-stocknr. 761-9727
FabrikantnummerMAX483CSA+T
FabrikantMaxim Integrated
1,90 €
Each
Aantal stuks
1 1 1 1 1 250kbps SOIC 8 Single Ended Differential RS-422/ RS-485 Single 5 V 5 x 4 x 1.5mm
Related Products
Wurth WE-LPF series Multilayer Chip Low-Pass Filters with ...
Description:
Wurth WE-LPF series Multilayer Chip Low-Pass Filters with a power capacity up to 3W, low insertion loss and high attenuation in the stop-band. Applications include: RF functions; Wireless communication systems (e.g. DECT; PACS; PHS; GSM; WLAN; Bluetooth).
The MCP2515 is a second generation stand-alone CAN ...
Description:
The MCP2515 is a second generation stand-alone CAN controller. It is pin and function compatible with the MCP2510 and also includes upgraded features like faster throughput, databyte filtering, and support for time-triggered protocols. 18-pin packageSimple SPI interface to any MCUOne-shot ...
The MCP2515 is a second generation stand-alone CAN ...
Description:
The MCP2515 is a second generation stand-alone CAN controller. It is pin and function compatible with the MCP2510 and also includes upgraded features like faster throughput, databyte filtering, and support for time-triggered protocols. 18-pin packageSimple SPI interface to any MCUOne-shot ...
NXP range of Decoders, Multiplexers, Demultiplexers and Analogue ...
Description:
NXP range of Decoders, Multiplexers, Demultiplexers and Analogue Switches from the 74HC Family of CMOS Logic ICs. The 74HC Family use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but with the low power consumption ...