Tubing Sleeves for Pneumatic Adaptors & Fittings

Description:
• One-Touch push to connect configuration allows for an instant tubing connection• Useful for piping in confined space, due to its six-angle wrench processing inside• Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube ...

Description:
The Festo silencer used for reducing noise and avoiding contamination at the exhaust port of pneumatic component. It assembled in any position and operating pressure complete temperature range 0 - 10 bar. Its flow rate to atmosphere is 6000 l/min. ...

Description:
The Festo push-in sleeve NPQM-D-S12-E-P10 is standard in size. It has Nominal size=10 mm and Operating pressure complete temperature range=-0,95 - 16 bar. Operating medium=Compressed air in accordance with ISO8573-1:2010 [7:-:-] Note on operating and pilot medium=Lubricated operation possible.

Description:
The Festo push-in sleeve NPQM-D-S6-E-P10 is standard in size. It has Nominal size=4 mm and Operating pressure complete temperature range=-0,95 - 16 bar, Operating medium=Compressed air in accordance with ISO8573-1:2010 [7:-:-] Note on operating and pilot medium=Lubricated operation possible.