Hydraulic Adaptors, Fittings & Couplings

Keep your pneumatic and hydraulic assemblies moving with our superb range of hydraulic adaptors, fittings & couplings. Included in this section are compression tube fittings, hose clamps, quick connect couplings and sleeves.

What are hydraulic fittings?

Hydraulic fittings are designed to connect hydraulic hoses, tubes and pipes together in hydraulics, these fittings enable you to contain, direct and control the flow of hydraulic pressure. Such as compression fittings, crimp fittings, flange fittings, push to connect fittings.

What are hydraulic coupling & adaptors?

Hydraulic couplings are a fitting used to connect pieces of hose, pipe or tube, usually, these are used with hydraulic hoses, they are often made from steel as it can withstand the pressure and is corrosion resistant which is important as hydraulics aren't only water-based some hydraulic fluids are acid or oil based.

What's the difference between a coupling & adaptors?

Couplings are when both ends to be attached to the hose, pipe or tube, you can also get reducer couplings that are smaller on one end, and adaptors have separate endings, for example, one BSP male to female.

Related Products
The high-pressure banjo elbow from Parker has a ...
Description:
The high-pressure banjo elbow from Parker has a BSP parallel thread with port sealing achieved by a hardened sealing ring. • EO 24° cone end/ male BSPP thread with metal sealing ring• Steel, zinc plated, Cr(VI) free• NBR standard seal• ...
These fittings incorporate parallel threads with a pre-assembled ...
Description:
These fittings incorporate parallel threads with a pre-assembled sealing washer, giving instant assembly, security and consistent assembled height. Compact and low profile these banjos give better space utilisation and accessibility. Nitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to ...
Equal 90° parallel thread male elbow joint.Parkers K ...
Description:
Equal 90° parallel thread male elbow joint.Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. ...
Couplings manufactured to ISO standards and fitted with ...
Description:
Couplings manufactured to ISO standards and fitted with NBR (Nitrile) seals, with secondary PTFE seals for backup purposes. Suitable for working environments within -25 to 125°C. Resistance to high temperatures (-25 → +125 °C)Suited to general industrial and agricultural applicationsNitrile ...