Butterfly Valves

A butterfly valve regulates or halts the flow of a fluid using a rotating disk. The disk is positioned in the centre of the pipe and a rod extends through the disk on out of the value to a handle. Rotating the handle turns the disk to open and close the valve. As the disk is always present, it will cause a pressure drop due to friction on the disk.

...
Lees meer Lees minder

Filters

1 - 4 van 4 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Connection Size Body Material Disc Material Handle Material Maximum Operating Temperature Minimum Operating Temperature Operating Temperature Range Pressure Rating
RS-stocknr. 265-3729
FabrikantRS PRO
142,13 €
Each
Aantal stuks
1in Stainless Steel EPDM Glass Fibre Reinforced Nylon +120°C -10°C -10 +120 °C 0.9 10bar
RS-stocknr. 265-3763
FabrikantRS PRO
204,10 €
Each
Aantal stuks
3in Stainless Steel EPDM Glass Fibre Reinforced Nylon +120°C -10°C -10 +120 °C 0.9 10bar
RS-stocknr. 265-3741
FabrikantRS PRO
153,31 €
Each
Aantal stuks
2in Stainless Steel EPDM Glass Fibre Reinforced Nylon +120°C -10°C -10 +120 °C 0.9 10bar
RS-stocknr. 265-3735
FabrikantRS PRO
142,38 €
Each
Aantal stuks
1-1/2in Stainless Steel EPDM Glass Fibre Reinforced Nylon +120°C -10°C -10 +120 °C 0.9 10bar
Related Products
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25 / PN40. Connections are flanged (wafer type)Low pressure dropSimple and compact designHorizontal or vertical installation. ...
The 316 stainless steel sprung disc check valve ...
Description:
The 316 stainless steel sprung disc check valve is suitable for ANSI and EN flanges. • Low pressure drop• Simple and compact design• Overall lengths according to DIN 3202 part 3-K4• Horizontal or vertical installation.
Lockable lever as standard For easy installation and ...
Description:
Lockable lever as standard For easy installation and removalBall seals PTFEIntegrated stainless steel mounting insertsZ-dimension, valve end and union nut are compatible with type ... with position feedback sensor, incl. LED feedback Manual spring return lever ("Dead man") Pneumatic or ...