- RS-stocknr.:
- 674-061
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 674-061
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
RS PRO D-Shackle, Zinc-Plated Steel, 3.5 tonne
This shackle from RS PRO is designed for securing loads, either as a tie-down or for lifting. They are rated for up to 3.5 tonnes each and can fit a 1 3/8 in rope or chain to be held securely. As a screw pin shackle, it's secured by passing the pin between the jaws and screwing it tight, though additional tightening torque can be provided by passing a bar through the hole in the pin if required. The one-inch pin can be passed through a mounting point on the load or ground to hold it down.
This type of shackle is suitable for use in shipping for securing cargo, attaching a load to a crane or anywhere else where a physical connection is required. The high-tensile galvanised steel construction ensures both strength and resistance to corrosion.
This type of shackle is suitable for use in shipping for securing cargo, attaching a load to a crane or anywhere else where a physical connection is required. The high-tensile galvanised steel construction ensures both strength and resistance to corrosion.
Features and Benefits
Screw pin
D-shackle
Zinc-plated finish
Zinc-plated steel material
Jaw width of 1 3/8 in
Pin diameter of 1 in
Shackle diameter of 7/8 in
Safe working load of 3.5 t
D-shackle
Zinc-plated finish
Zinc-plated steel material
Jaw width of 1 3/8 in
Pin diameter of 1 in
Shackle diameter of 7/8 in
Safe working load of 3.5 t
Specificaties
Kenmerk | Waarde |
---|---|
Material | Zinc Plated Steel |
Shackle Type | D-Shackle |
Pin Type | Screw Pin |
Safe Working Load | 3.5t |
Shackle Diameter | 7/8in |
Jaw Width | 1-3/8in |
Pin Diameter | 1in |
Finish | Zinc Plated |