- RS-stocknr.:
- 193-1108
- Fabrikantnummer:
- STEVAL-EFUSE01
- Fabrikant:
- STMicroelectronics
Dit product is momenteel niet beschikbaar voor nabestelling.
We hebben dit product helaas niet op voorraad en het is op dit moment niet beschikbaar voor nabestelling.
Toegevoegd
Prijs Per stuk
€ 39,52
(excl. BTW)
€ 47,82
(incl. BTW)
Aantal stuks | Per stuk |
1 - 1 | € 39,52 |
2 - 4 | € 38,45 |
5 - 9 | € 37,44 |
10 - 24 | € 36,48 |
25 + | € 35,57 |
- RS-stocknr.:
- 193-1108
- Fabrikantnummer:
- STEVAL-EFUSE01
- Fabrikant:
- STMicroelectronics
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
The STEF01 E-fuse integrates a control circuit and a low on-resistance MOSFET switch and provides a full set of protections, including overcurrent, overvoltage and inrush current. You can adjust UVLO threshold, clamping voltage and overload current limits through mechanical trimmers.
An external MOSFET, driven by the STEF01 gate driver pin, can be mounted to implement a reverse-current blocking circuit. The inrush current can be controlled by the output voltage ramp rate, with the dedicated soft start circuit embedded in the STEF01 device. The STEVAL-EFUSE01 evaluation board lets you easily adjust the output voltage ramp rate at the desired startup time, by changing the Cdv/dt capacitor.
As most applications require a flag to signal that the output voltage is in the correct range, the STEVAL-EFUSE01 features a PG test point for information about the voltage drop on the pass element.
The STEVAL-EFUSE01 also features thermal latch and auto-retry thermal protection modes, selectable through a dedicated jumper configuration.
An external MOSFET, driven by the STEF01 gate driver pin, can be mounted to implement a reverse-current blocking circuit. The inrush current can be controlled by the output voltage ramp rate, with the dedicated soft start circuit embedded in the STEF01 device. The STEVAL-EFUSE01 evaluation board lets you easily adjust the output voltage ramp rate at the desired startup time, by changing the Cdv/dt capacitor.
As most applications require a flag to signal that the output voltage is in the correct range, the STEVAL-EFUSE01 features a PG test point for information about the voltage drop on the pass element.
The STEVAL-EFUSE01 also features thermal latch and auto-retry thermal protection modes, selectable through a dedicated jumper configuration.
Specificaties
Kenmerk | Waarde |
---|---|
Power Management Function | Electronic Fuse |
Kit Classification | Evaluation Board |
Featured Device | STEF01 |
Kit Name | STEF01 Fully Programmable Universal Electronic Fuse |
- RS-stocknr.:
- 193-1108
- Fabrikantnummer:
- STEVAL-EFUSE01
- Fabrikant:
- STMicroelectronics