- RS-stocknr.:
- 251-8137
- Fabrikant:
- RS PRO
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/08/2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk (in een verpakking 25)
€ 0,297
(excl. BTW)
€ 0,359
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
25 - 475 | € 0,297 | € 7,425 |
500 - 1850 | € 0,247 | € 6,175 |
1875 - 7475 | € 0,209 | € 5,225 |
7500 - 14975 | € 0,194 | € 4,85 |
15000 + | € 0,178 | € 4,45 |
*prijsindicatie |
- RS-stocknr.:
- 251-8137
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- TW
Productomschrijving
RS PRO, 6 Way, 2 Row, Straight Pin Header
Use this electrical connector from RS PRO to bridge printed circuit boards (PCBs) and transmit signals and current between them. For versatility, you can either use this connector to create board-to-wire setups with an electronic harness terminal or you can use it independently for board-to-board connections.
This connector can be through-hole mounted for a strong mechanical bond, so you can trust that it will stay in place for a long time. It's made from heat-resistant thermoplastic, so it won't be warped or damaged by reflow or soldering. The pin header has contacts made of highly conductive tin-plated brass for reliable electrical conductivity.
A PCB header like this one provides an efficient way to connect boards and wires. The contacts are also easy to remove from PCBs for use on prototypes that need revising.
This connector can be through-hole mounted for a strong mechanical bond, so you can trust that it will stay in place for a long time. It's made from heat-resistant thermoplastic, so it won't be warped or damaged by reflow or soldering. The pin header has contacts made of highly conductive tin-plated brass for reliable electrical conductivity.
A PCB header like this one provides an efficient way to connect boards and wires. The contacts are also easy to remove from PCBs for use on prototypes that need revising.
Features and Benefits
- Straight body orientation
- Brass contact material
- Tin contact plating
- Current rating of 1 A
- Mating pin length of 7 mm
- Through-hole mounting type
- Six contacts
- Two rows
- Pitch of 2.54 mm
- Unshrouded
- Tail pin length of 3 mm
- Solder termination method
- Voltage rating of 650 V
Specificaties
Kenmerk | Waarde |
---|---|
Pitch | 2.54mm |
Number of Contacts | 6 |
Number of Rows | 2 |
Body Orientation | Straight |
Shrouded/Unshrouded | Unshrouded |
Mounting Type | Through Hole |
Termination Method | Solder |
Contact Plating | Tin |
Contact Material | Brass |
Current Rating | 1.0A |
Tail Pin Length | 3.0mm |
Mating Pin Length | 7.0mm |
Voltage Rating | 650.0 V |