Phoenix Contact RIF-0-RSC-24DC/21AU Series Interface Relay, DIN Rail Mount, 24V dc Coil, SPDT, 1-Pole
- RS-stocknr.:
- 175-0518
- Fabrikantnummer:
- 2903372
- Fabrikant:
- Phoenix Contact
- RS-stocknr.:
- 175-0518
- Fabrikantnummer:
- 2903372
- Fabrikant:
- Phoenix Contact
Wetgeving en conformiteit
- Land van herkomst:
- CZ
Productomschrijving
Phoenix Contact Interface Relay, Pre-Assembled, 0.22W Maximum Power Loss - RIF-0-RSC-24DC/21AU - 2903372
Keen to seek out power faults in your control system? Fit this interface relay from Phoenix Contact. It's a plug-in type that isolates its input and output against voltages up to 6kV, cutting the risk of damage from power surges. Gold-plated silver alloy pins efficiently conduct electricity for reliable switching every time. By reacting to signals in between 5 and 8ms, this device is a safe bet when you need speedy system management. Screw terminals make it simple to secure conductors.
As the relay releases its plug-in element with a simple push button ejector, swapping components is simple. Knocks and bumps are no match for the hardwearing plastic housing. Thanks to its snappy DIN rail mounting method, the module clips into a system without the hassle of tools. It comes pre-assembled, so you can skip through preparation time to get straight to switching.
As the relay releases its plug-in element with a simple push button ejector, swapping components is simple. Knocks and bumps are no match for the hardwearing plastic housing. Thanks to its snappy DIN rail mounting method, the module clips into a system without the hassle of tools. It comes pre-assembled, so you can skip through preparation time to get straight to switching.
Features & Benefits
• Compact measurements of 6.2 (W) x 84 (H) x 82mm (D) for easy installation in busy cabinets
• EN 60068-2-60 approval indicates effective protection from corrosive gas
• Tested to IEC 60947-5-1 standards for use in control setups
• EN 60068-2-60 approval indicates effective protection from corrosive gas
• Tested to IEC 60947-5-1 standards for use in control setups
Specificaties
Kenmerk | Waarde |
---|---|
Coil Voltage | 24V dc |
Contact Configuration | SPDT |
Mounting Type | DIN Rail |
Number of Poles | 1 |
Maximum Input Voltage | 24V dc |
Minimum Input Voltage | 24V dc |
Switching Voltage | 250V ac/dc |
Terminal Type | Screw |
Depth | 82mm |
Height | 84mm |
Length | 6.2mm |
Series | RIF-0-RSC-24DC/21AU |
Contact Material | Silver Alloy |
Input Current | 9mA |
Minimum Operating Temperature | -40°C |
Accessory Type | Relay Module |
Dimensions | 6.2 x 82 x 84mm |
Maximum Operating Temperature | +60°C |
Relay Switching Classification | Pre-Assembled Relay Module |
Standards Met | DIN EN 50178, UL 94 |
Special Features | IP20 Relay Base, Safe Isolation |
Relay Type | Solid State Relay |
Operating Temperature Range | -40 → +60°C |
Life | 2 x 10^7 (Mechanical) cycles |
Input Voltage Range | 19.2 → 36V dc |