- RS-stocknr.:
- 539-6980
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 539-6980
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
RS PRO 2 x 58 W, Anti-Corrosive Light Fitting, 2, Fluorescent, Temp T4, 240 V AC
This RS PRO anti-corrosive light fitting consists of two fluorescent luminaires. You can use it to provide illumination in hazardous environments, either inside or outside. It's classed as unrestricted breathing equipment, which means it doesnt need any routine testing during annual maintenance inspections.
The light has a moulded GRP (glass reinforced plastic) casing that's sturdy but lightweight and its strong polycarbonate diffuser will ensure good light distribution. The bi-pin fluorescent tubes are easy to access and change – simply release the stainless-steel clips and remove the diffuser.
Like all of our RS PRO range, this product has been tested by engineers for reliability and durability. There's an electronic HF (high-frequency) ballast for longer tube life and lower running costs. It comes with two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. ATEX series XN certified, it's also suitable for use in hazardous areas.
The light has a moulded GRP (glass reinforced plastic) casing that's sturdy but lightweight and its strong polycarbonate diffuser will ensure good light distribution. The bi-pin fluorescent tubes are easy to access and change – simply release the stainless-steel clips and remove the diffuser.
Like all of our RS PRO range, this product has been tested by engineers for reliability and durability. There's an electronic HF (high-frequency) ballast for longer tube life and lower running costs. It comes with two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. ATEX series XN certified, it's also suitable for use in hazardous areas.
Features and Benefits
Anti-corrosive light fitting
Suitable for hazardous areas
Zone classification of 2 (for situations that will be hazardous infrequently)
Temperature classification of T4 for a maximum temperature of +135°C
Wattage of two x 58 W
Fluorescent lamp
Voltage rating of 240 V AC
Anti-corrosive
Dimensions of (L) 1.62 m x (W) 170 mm
Individual lamp wattage of 58 W
Two lamps
EEX nc II 3 GD, EN50021 compliant for safety
ATEX series XN certified for hazardous areas
Suitable for hazardous areas
Zone classification of 2 (for situations that will be hazardous infrequently)
Temperature classification of T4 for a maximum temperature of +135°C
Wattage of two x 58 W
Fluorescent lamp
Voltage rating of 240 V AC
Anti-corrosive
Dimensions of (L) 1.62 m x (W) 170 mm
Individual lamp wattage of 58 W
Two lamps
EEX nc II 3 GD, EN50021 compliant for safety
ATEX series XN certified for hazardous areas
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Note
Lamps are not included
Specificaties
Kenmerk | Waarde |
---|---|
Type | Anti-Corrosive |
Zone Classification | 2 |
Temperature Classification | T4 |
Wattage | 2 x 58 W |
Lamp Type | Fluorescent |
Voltage Rating | 240 V ac |
Anti-corrosive | Yes |
Length | 1620 mm |
Width | 170 mm |
Individual Lamp Wattage | 58W |
Number of Lamps | 2 |
Hazardous Area Certification | ATEX |
Series | XN |
Standards Met | EEX nc II 3 GD, EN50021 |