RS PRO HSS Drill Bit, 20.5mm Head, 3 Flute(s), 90°, 1 Piece(s)
- RS-stocknr.:
- 673-8710
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
161 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 23,48
(excl. BTW)
€ 28,41
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 23,48 |
| 10 - 24 | € 22,54 |
| 25 + | € 21,82 |
- RS-stocknr.:
- 673-8710
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Countersink 63 mm x 20.5 mm 1 Piece
If you need an easy way to install countersunk screws, choose this countersink drill bit from RS PRO. It creates a crater at the surface of a conventional drilled hole so you can fully embed your countersunk screws in a surface.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
The shaft of the drill bit fits into your drill driver securely and is thick enough to withstand high-pressure drilling into dense materials. The hexagonal end cuts through the surface material and shaves away the edges as the end thickens out, leaving a smooth, clean hole.
The end has three flutes to reduce vibration for greater precision during use. Use this drill bit at slower speeds for extra steadiness and accuracy. You can also use it after regular drilling to remove tough burr distortions at the surface of the hole.
Features and Benefits
• Countersink drill bit type
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
• Countersink angle of 90º
• High-speed steel (HSS) material
• Three flutes
• One piece
• Head diameter of 20.5 mm
• Overall length of 63 mm
• Shank diameter of 10 mm
• Shank length of 42 mm
Specificaties
Kenmerk | Waarde |
|---|---|
| Head Diameter | 20.5mm |
| Drill Bit Type | Countersink |
| Countersink Angle | 90° |
| Number of Flutes | 3 |
| Material | HSS |
| Overall Length | 63 mm |
| Shank Diameter | 10 mm |
| Number of Pieces | 1 |
| Shank Length | 42mm |