- RS-stocknr.:
- 209-6693
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 209-6693
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
RS PRO Stainless Steel External Circlip, 20 mm Shaft Diameter, 19 mm Groove Diameter
External clips are used as substitutes to threaded sleeves, rivets and cotter pins to set collars and nuts. Instead of using bulky fasteners, these circlips can be used to sit flush around shaft or bore components. These particular clips from the RS PRO series are compatible with 20 mm shafts and 19 mm groove diameters.
They're easy to use, requiring only an RS PRO external circlips plier to open up the ends. Just put the tips of the circlips into the pliers and simply push to open. They can then be placed over a shaft groove. As they're constructed from semi-flexible stainless-steel, they are both easy to install and remove.
These circlips undergo testing for quality and reliability before receiving the RS stamp of approval. The circlips are conformed to dimensions specified in DIN (Deutsches Institut für Normung, the German Institute of Standardisation) 471 (BSC SF 14) and BS3673 standards.
They're easy to use, requiring only an RS PRO external circlips plier to open up the ends. Just put the tips of the circlips into the pliers and simply push to open. They can then be placed over a shaft groove. As they're constructed from semi-flexible stainless-steel, they are both easy to install and remove.
These circlips undergo testing for quality and reliability before receiving the RS stamp of approval. The circlips are conformed to dimensions specified in DIN (Deutsches Institut für Normung, the German Institute of Standardisation) 471 (BSC SF 14) and BS3673 standards.
Features and Benefits
External open-ended circlips
For use with 20 mm shafts
Fits to 19 mm groove diameter
Ring thickness of 1.2 mm
Outside ring diameter of 28.4 mm
Tough and durable stainless steel construction
Conforms to dimensions specified in DIN 471 (BSC SF 14) and BS3673 standards
For use with 20 mm shafts
Fits to 19 mm groove diameter
Ring thickness of 1.2 mm
Outside ring diameter of 28.4 mm
Tough and durable stainless steel construction
Conforms to dimensions specified in DIN 471 (BSC SF 14) and BS3673 standards
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
---|---|
Circlip Type | External |
For Shaft Diameter | 20mm |
Fits Groove Diameter | 19mm |
Ring Thickness | 1.2mm |
Ring Outside Diameter | 28.4mm |
Material | Stainless Steel |