RS PRO Clip for use with 63.5 mm Dia. Capacitor Nylon
- RS-stocknr.:
- 203-5733
- Fabrikant:
- RS PRO
60 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
755 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 5)
€ 1,04
(excl. BTW)
€ 1,26
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 5 - 45 | € 1,04 | € 5,20 |
| 50 - 95 | € 1,00 | € 5,00 |
| 100 - 245 | € 0,926 | € 4,63 |
| 250 + | € 0,866 | € 4,33 |
| *prijsindicatie | ||
- RS-stocknr.:
- 203-5733
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
Nylon Mounting Clamps
These RS brand clamps are designed to securely hold tubular capacitor components in place, offering connection protection from physical stresses such as vibration or shock. The advantage of the nylon design of this product is that it is less abrasive on the insulating sleeve of the capacitor, meaning that it is well suited where vibration is a factor.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
Accessories
This selection of mounting clips is designed to support and help prevent component failure caused by vibration and mechanical shock.
Specificaties
Kenmerk | Waarde |
|---|---|
| Accessory Type | Clip |
| For Use With | 63.5 mm Dia. Capacitor |
| Material | Nylon |
| Diameter | 63.5mm |
| Compatible Capacitor Shapes | Cylindrical |
| Compatible Capacitor Diameter | 63.5mm |
| Clip Diameter | 63.5mm |