Finned Tubular Heater, 200 W, 230 V ac

RS-stocknr.:: 374-2296
Fabrikantnummer:: RA 2652 200
Fabrikant:: Acim Jouanin

7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)

58 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)

Toegevoegd

Prijs Per stuk

€ 45,32

(excl. BTW)

€ 54,84

(incl. BTW)

Aantal stuks	Per stuk
1 - 4	€ 45,32
5 - 9	€ 43,95
10 +	€ 42,14

RS-stocknr.:: 374-2296
Fabrikantnummer:: RA 2652 200
Fabrikant:: Acim Jouanin

Datasheets

Wetgeving en conformiteit

Land van herkomst:: FR

Productomschrijving

RA Series Blade Resistor Heaters

Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.

ACIM Jouanin Strip Heater

The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth

Features and Benefits

Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Warning

For reasons of safety the heater block and/or heater sheath must be bonded to earth

Approvals

UL Recognised; CSA Certified

Specificaties

Kenmerk	Waarde
Element Type	Air Heater
Power Rating	200 W
Supply Voltage	230 V ac
Heating Element Form	Tubular
Peak Temperature	+200°C

RS-stocknr.:: 374-2296
Fabrikantnummer:: RA 2652 200
Fabrikant:: Acim Jouanin